Best Watch Winder for B.R.M. | Tempus Luxury
B.R.M. — Bernard Richards Manufacture — was founded in 2003 by French racing driver Bernard Richards, who wanted watches engineered with the same obsession as racing machinery. Hand-assembled in France, B.R.M. chronographs are unmistakably motorsport: tachymeter scales, crown guards like roll cages, cases machined like engine components.
If you own a B.R.M., chances are you own a chronograph — and chronographs have the most demanding TPD requirements of any watch type. A winder set to 800 TPD clockwise keeps your V12 or SCR wound and ready to time.
B.R.M. TPD Requirements
B.R.M. is a chronograph-heavy brand, and it shows in the settings. Most of the V-series and SCR chronographs need 800 TPD clockwise. The simpler three-hand automatics — the V 6, V 7 and 3MVT-52 — are content at 650 TPD bi-directional.
| Model | Recommended Setting |
|---|---|
| B.R.M. V12-44 Automatic Chrono | 800 TPD, clockwise |
| B.R.M. V 6 Automatic | 650 TPD, bi-directional |
| B.R.M. SCR Racing | 800 TPD, clockwise |
| B.R.M. G45-T | 800 TPD, clockwise |
| B.R.M. V 9 Automatic Chrono | 650 TPD, bi-directional |
Tap any model above for its full settings page, including movement reference and setup advice.
What to Look for in a Winder for B.R.M.
A winder that reaches 800 TPD in clockwise mode — non-negotiable for the V12, V14 and SCR chronographs. Programmable TPD with all three winding directions covers the whole B.R.M. range, including the gentler three-hand models.
Beyond the numbers, the fundamentals still apply: whisper-quiet operation so the winder can live in a bedroom, a secure holder that grips without marking the case, and a rest-friendly rotation pattern that mimics natural wear. Every Tempus winder is built around these, with programmable TPD up to and beyond 800, three winding directions and a 3-year warranty as standard.
Three Tempus Winders for B.R.M. Owners
- Tempus 4 Biometric (£971) — fingerprint security for a valuable racing rotation.
- Tempus 6 Touch Screen (£746) — six independently set rotors for mixed chrono and three-hand models.
- Tempus 8 Watch Winder Safe Black (£1,495) — secure fingerprint-entry storage for the serious collector.
Why B.R.M. Owners Bother With a Winder
A chronograph left unworn runs down in a day or two — and a B.R.M. is built to be used, not reset. A winder keeps your V12 or SCR wound so the chronograph is ready to time the moment inspiration strikes, with the date always correct and the movement's lubricants evenly distributed.
Single vs Multi-Watch for B.R.M.
One B.R.M. chronograph? A single or double winder set to 800 clockwise does the job. But motorsport collectors rarely stop at one — and the split between 800-clockwise chronographs and 650 bi-directional three-hand models makes a multi-watch unit with independent per-rotor settings the smart buy. One power supply, one footprint, the whole pit crew ticking.
Frequently Asked Questions
Do B.R.M. watches need a watch winder?
No automatic watch needs a winder — but without one, your B.R.M. chronograph will run down after a day or two off the wrist. A winder keeps it wound, accurate and ready to time.
What happens if the TPD setting is wrong?
Nothing dramatic. Modern automatics have a slipping mainspring that prevents overwinding, so an incorrect setting cannot damage the movement — the watch simply may not stay fully wound. Use the table above as your starting point.
Can Tempus winders reach 800 TPD clockwise?
Yes. Tempus winders offer programmable TPD well beyond 800 in clockwise, counter-clockwise and bi-directional modes, covering every B.R.M. calibre listed here.
What warranty do Tempus winders carry?
Every Tempus watch winder includes a 3-year warranty. Tempus can also repair any Tempus-brand winder even after the warranty period has ended.
For model-specific settings, see our TPD settings guide.
What TPD setting does a B.R.M. V12-44 Automatic Chrono need?
The B.R.M. V12-44 Automatic Chrono needs 800 TPD clockwise. Set your Tempus winder to 800 TPD in clockwise mode and the chronograph calibre will stay fully wound and ready to time.
Why do B.R.M. chronographs need 800 TPD clockwise?
Chronograph modules add friction to the going train, so the movement needs more turns per day to stay wound. B.R.M.'s chronograph calibres also wind in the clockwise direction only — both are covered by every Tempus winder's three winding modes.
Can I wind a B.R.M. chronograph with a three-hand watch together?
Yes, with independent settings. A V12 chronograph wants 800 TPD clockwise while a V 6 three-hand model is happy at 650 bi-directional. Tempus multi-watch winders set each rotor independently, so one unit serves both.
Will a winder damage my B.R.M.?
No. Modern automatic movements have a slipping mainspring that prevents overwinding, so a winder cannot damage your B.R.M. Tempus winders use quiet Japanese and German motors and come with a 3-year warranty.
What is the best Tempus winder for a B.R.M. motorsport collection?
The Tempus 8 Watch Winder Safe Black (£1,495) pairs secure fingerprint-entry storage with proper 800 TPD clockwise winding — ideal for a valuable racing-inspired rotation.