Best Watch Winder for Certina | Tempus
Certina has been quietly making excellent Swiss sports watches since 1888, and its DS — Double Security — concept has protected movements against shocks and water since 1959. The DS Action Diver line, with ISO-rated dive watches at thoroughly sensible prices, is the sweet spot of the range, alongside heritage reissues like the DS-2.
Certina owners tend to be enthusiasts who actually wear their watches — diving, travelling, living in them. A winder fits that philosophy: it keeps the movement exercised between adventures and the date set, so the watch is ready the moment the weekend arrives. No ceremony, just readiness.
Certina TPD Requirements
Certina is beautifully straightforward. Every model in our database — the DS Action Diver 38 and 43, and the DS-2 Heritage — runs at 725 TPD bi-directional. One setting covers the entire brand.
| Model | Recommended Setting |
|---|---|
| Certina DS Action Diver 43 | 725 TPD, bi-directional |
| Certina DS Action Diver 38 | 725 TPD, bi-directional |
| Certina DS-2 Heritage | 725 TPD, bi-directional |
Tap any model above for its full settings page, including movement reference and setup advice.
What to Look for in a Winder for Certina
Look for a winder with a genuine 725 TPD bi-directional programme — it sits between the common 650 and 800 presets, so cheaper winders with coarse steps can miss it. Tempus winders offer fine-grained TPD control, so 725 is dialled in exactly. The DS Action Divers are proper tool watches, so a sturdy, well-padded holder suits them.
Beyond the numbers, the fundamentals still apply: whisper-quiet operation so the winder can live in a bedroom, a secure holder that grips without marking the case, and a rest cycle that lets the movement pause naturally. Every Tempus winder is built around these, with quiet Japanese and German motors, programmable TPD, three winding directions and a 3-year warranty as standard.
Two Tempus Winders for Certina Owners
- Tempus Single Remote Control (£296.00) — a discreet single for the daily DS Action Diver.
- Tempus 2 Biometric (£446.00) — fingerprint-secured double for a Diver and a DS-2.
Why Certina Owners Bother With a Winder
A dive watch with a date that has stopped is a watch that needs setting before it can be trusted — and a diver's whole purpose is trust. A winder keeps your Certina running and accurate, so the watch that goes on your wrist for the swim, the trip or the work week is correct from the first glance. It also keeps the movement's lubricants distributed between wears.
Single vs Multi-Watch for Certina
One Certina as a daily? Honestly, a single winder is all most owners need — it keeps the watch wound on rest days. If you rotate a Diver with a DS-2 dress piece, a double unit covers both on the same 725 TPD programme, which could not be simpler.
Frequently Asked Questions
Do Certina watches need a watch winder?
No automatic watch needs a winder — but without one, your Certina will run down after a couple of days off the wrist and you will be resetting the date. A winder keeps it ready to wear.
What TPD setting does a Certina need?
725 TPD bi-directional across the range in our database — DS Action Diver 38 and 43, and DS-2 Heritage. Use the table above as your starting point.
What happens if the TPD setting is wrong?
Nothing dramatic. Modern automatics have a slipping mainspring that prevents overwinding, so an incorrect setting cannot damage the movement — the watch simply may not stay fully wound.
What warranty do Tempus winders carry?
Every Tempus watch winder includes a 3-year warranty. Tempus can also repair any Tempus-brand winder even after the warranty period has ended.
For model-specific settings, see our TPD settings guide.
What TPD setting does a Certina DS Action Diver need?
The Certina DS Action Diver — both the 38mm and 43mm — needs 725 TPD bi-directional. Set your Tempus winder to 725 TPD bi-directional for a full wind.
What TPD does a Certina DS-2 need?
The Certina DS-2 Heritage needs 725 TPD bi-directional, the same as the DS Action Divers. The whole Certina range shares one setting.
Can I wind two Certina models together?
Yes — every Certina in our database uses 725 TPD bi-directional, so any combination of models can share a single programme on a multi-watch Tempus winder.
Will a winder damage my Certina?
No. Modern Certina movements have a slipping mainspring that prevents overwinding. A quality winder simply keeps your Certina wound and ready. All Tempus winders use quiet Japanese and German motors and come with a 3-year warranty.
What's the best Tempus winder for a Certina?
A single Tempus winder covers the daily-wear Diver perfectly. If you rotate two or three pieces, the Tempus 2 — with fingerprint security — keeps the pair ready on the shared 725 TPD setting.