Best Watch Winder for Farer | Tempus
Farer is a British watch brand founded in London in 2015, building Swiss-made watches with distinctive, colour-forward design at honest prices. The Aqua Compressor dive watch, the Endeavour GMT and the Lander field watches have earned the brand a devoted following among collectors who value character over convention.
Farer automatics — the Aqua Compressor, the Lander GMTs and field watches — are Swiss movements that keep their best time in motion. A watch winder set to the right TPD keeps your Farer wound and ready, with the date and GMT hand correct.
Farer TPD Requirements
Farer settings are simple: the Aqua Compressor, Endeavour GMT and Lander III want 725 TPD bidirectional, while the Lander IV GMT settles at 650 TPD bidirectional. A winder with bidirectional mode covers every Farer model.
| Model | Recommended Setting |
|---|---|
| Farer Aqua Compressor | 725 TPD, bidirectional |
| Farer Lander III | 725 TPD, bidirectional |
| Farer Endeavour GMT | 725 TPD, bidirectional |
| Farer Lander IV GMT | 650 TPD, bidirectional |
Tap any linked model above for its full settings page, including setup advice.
What to Look for in a Winder for Farer
Bidirectional mode with 650 to 725 TPD covers every Farer. The Aqua Compressor’s case and the brand’s colour-rich dials deserve a winder that shows them off — soft holders, quiet motors and clean presentation.
Programmable TPD, three winding directions and a 3-year warranty are standard on Tempus winders — choose on capacity.
Three Tempus Winders for Farer Owners
- Tempus 2 Touch Screen (£371) — keep two Farers wound and ready.
- Tempus 4 Biometric (£971) — room for the collection with fingerprint security.
- Tempus 12 Touch Screen (£1,421) — independent settings for a large stable.
Why Farer Owners Bother With a Winder
The Endeavour and Lander GMTs carry second-time-zone displays that drift when the watch stops — exactly the complication a winder protects. The Aqua Compressor is a weekend watch by nature; a winder means it is running when the weekend arrives.
Single vs Multi-Watch for Farer
One Farer worn daily? A single or double winder keeps the second ready. Farer collectors tend to own several references across the brand’s colourful range — and a 4-watch unit keeps them all wound from one footprint.
Frequently Asked Questions
Do Farer watches need a watch winder?
No automatic needs one, but a Farer left off the wrist runs down in a couple of days, leaving the date and GMT hand to reset. A winder keeps it ready.
What TPD do Farer watches use?
725 TPD bidirectional for most models including the Aqua Compressor and Lander III; the Lander IV GMT uses 650 TPD bidirectional.
What happens if the TPD setting is wrong?
Nothing dramatic. Modern automatics have a slipping mainspring that prevents overwinding, so an incorrect setting cannot damage the movement — the watch simply may not stay fully wound.
What warranty do Tempus winders carry?
Every Tempus watch winder includes a 3-year warranty. Tempus can also repair any Tempus-brand winder even after the warranty period has ended.
For model-specific settings, see our TPD settings guide.
What TPD setting does a Farer Aqua Compressor need?
The Farer Aqua Compressor needs 725 TPD bi-directional. Set your Tempus winder to 725 TPD in bi-directional mode and it stays perfectly wound.
Does a Farer GMT need a winder?
If you do not wear it daily, yes. The Endeavour GMT needs 725 TPD bi-directional (the Lander IV GMT needs 650), and a winder keeps the second time zone honest.
Can I wind an Aqua Compressor and a Lander III together?
Yes — both use 725 TPD bi-directional, so they wind perfectly side by side.
Will a winder damage my Farer?
No. The movements have a slipping mainspring that prevents overwinding. Tempus winders use quiet Japanese and German motors and carry a 3-year warranty.
What's the best Tempus winder for a Farer collection?
For one or two watches, a single or double winder is ideal. For a colourful multi-reference collection, a 4 or 6-watch unit with independent settings keeps everything wound.