Aquanaut TPD & Winder Settings | Tempus

Patek Philippe Aquanaut Watch Winder Settings (TPD)

Find the correct TPD (turns per day) and winding direction for your Patek Philippe Aquanaut. Using the right winder settings keeps your automatic movement running smoothly and ready to wear.

Patek Philippe Aquanaut TPD Settings

Setting	Value
TPD (Turns Per Day)	800
Winding Direction	Counter Clockwise
Reference	5167
Movement	Calibre 26-330 S C

About the Patek Philippe Aquanaut

The Patek Philippe Aquanaut is one of the most recognisable watches in Patek Philippe's collection, admired for its craftsmanship and enduring design. Like all fine automatic watches, it relies on wrist movement to keep the mainspring wound — which is exactly what a quality watch winder replicates when the watch isn't being worn.

Setting your winder to 800 TPD in counter clockwise mode matches the Aquanaut's calibre requirements. This keeps the power reserve topped up without unnecessary wear, so your watch is always ready to wear with the correct time and date.

Why Correct TPD Matters

Every automatic calibre has an optimal winding rate. Too few turns and the watch may run down; too many is simply unnecessary. The 800 TPD setting for the Patek Philippe Aquanaut is the sweet spot recommended by winder specialists — enough to maintain a full power reserve, gentle enough for long-term care.

Modern automatic movements have a slipping mainspring that prevents overwinding, so an incorrect setting won't damage your watch. But getting it right is the mark of a careful owner, and it ensures your Aquanaut is always ready when you reach for it.

Recommended Tempus Watch Winders

All Tempus watch winders offer fully programmable TPD and direction settings, so you can dial in exactly 800 TPD counter clockwise for your Patek Philippe Aquanaut. Every Tempus winder is backed by our 3-year warranty.

Tempus 2 Watch Winder – Biometric Lock

£446

View Product

Tempus 2 Watch Winder – Touch Screen

£371

View Product

Tempus 6 Watch Winder – Touch Screen

£746

View Product

Frequently Asked Questions

What TPD should I use for a Patek Philippe Aquanaut?

Use 800 TPD in counter clockwise mode. This matches the Aquanaut's calibre specification and keeps the power reserve fully wound.

Can I use the same winder for other watches?

Yes. Tempus winders let you program each rotor independently, so you can set 800 TPD for your Aquanaut and different settings for other watches in a multi-watch winder.

Will the wrong TPD damage my Aquanaut?

No. Modern automatic movements can't be overwound thanks to the slipping mainspring. The wrong setting just means the watch might not stay fully wound — it won't cause damage.

How long is the Tempus warranty?

Every Tempus watch winder comes with a 3-year warranty as standard, covering the motor and electronics.

Best watch winder for Patek Philippe | Full TPD settings index

Very good after initial problems with the

Very good after initial problems with the website but the service was excellent

Buy yours now before it finishes very nice 👍🙂

Buy yours now before it finishes very nice 👍 🙂 and comfortable

Great!